ADJUSTING THE SCOOTER
22
6.3 ASSEMBLY
Note: Raise the tiller before reassembling the
scooter.
1.
Place the freewheel mode lever in the drive position.
2.
Set the rear section in the up position and pick up
the front section to the connecting bracket of rear
section. (See Fig)
Make sure the release knob is re-enguaged fully
to the rear section and fully locked into place.
3.
Make sure that the front and rear sections are level.
4.
Fit the battery pack on the scooter. (See the Fig.)
Summary of Contents for k-lite
Page 1: ......