BATTERY AND CHARGING THE BATTERY
34
9.2 CHARGING THE BATTERIES
It is imperative that you observe the
sequence for
connecting and disconnecting the battery charger.
Be sure to follow the procedures shown below
accordingly.
1.
Turn the scooter key switch to
”OFF”.
2.
Connect the charger cord to the power outlet.
3.
Open the charging socket cap then connect the
charger plug to the charging
socket.
4.
The charger’s LED light will be red at the beginning
of a charge. The charging duration is at least 8 - 12
hours (but this will vary), based on the status of the
battery and temperature.
5.
The red LED will turn to green when the charging is
complete.
6.
Disconnect the cord and remove the round plug from
the charge socket.
Do not share the outlet with any other
device.
To avoid the risk of electric shock, this
equipment must only be
connected to
a grounded supply main.
Never use an extension cord to plug in
your battery charger.
Summary of Contents for k-lite
Page 1: ......
