27
Controlling the System Over the Phone (cont.)
Here’s a full list of the commands available for controlling
the system over the phone.
Placing an Outbound Call From the System
(Active SIM card required.)
From the starting screen, you can simply begin entering
numbers and a dialpad will appear. Press the OK Button to
begin dialing.
Alternatively, you can navigate to the Phone Menu in the
Main Menu, and dial from there.
You can also dial one of your programmed Contact Phone
Numbers by navigating to the Contacts Menu, choosing the
number, and the selecting Dialing.
Press 0 - Play back the recorded message
Press 1 - Enable 1-way Intercom / Listen In (SIM card required)
Press 2 - Turn sirens on
Press 3 - Turn sirens off
Press 4 - Arm the system in Away Mode
Press 5 - Disarm the system
Press 6 - Enable 2-way Intercom (SIM card required)
Press 7 - Disable 2-way Intercom
Press * - Repeat the menu options
Press # - Turn off the alarm, and re-arm the system
When the system calls you:
Press # - Prevents the system from calling any other phone
numbers. This action does not disarm the system.
When you place a call to the system:
Enter your password when prompted, then...
