23
Using an RFID Key Tag
Using a Secondary RFID Keypad
Using a Phone / Mobile App
See the section titled Controlling the System Over the
Phone. Also see the “My Fortress” Mobile App User Manual.
• Arm in Away Mode:
Press the Arm Button (locked padlock). If the Keypad
Lock is enabled, you will need to enter your 4-digit
User Password. If the Exit Delay is enabled, then the
system will be armed when the Exit Delay is finished.
You can skip the Exit Delay by pressing the Arm But-
ton again.
• Arm in Home Mode:
After pressing the Arm Button once, you can press
the Arm Button again to switch from arming in Away
Mode to arming in Home Mode instead. Note: If the
Exit Delay is enabled, you’ll also need to press the Arm
Button once to skip the Exit Delay. (see above re: Arm
in Away Mode)
• Disarm:
Swipe the RFID Key Tag directly in front of the RFID
icon on the main panel.
(The RFID Key Tag cannot be used to arm the system.)
• Disarm:
Swipe an RFID Key Tag, or enter the Keypad’s pass-
word and then press the Keypad’s Disarm Button.
• Arm:
Enter the Keypad’s password, then press Arm Button.
