30
PURE VIEW: Al
13
HOME GLASS BALUSTER INSTALLATION
ANGLE BRACKET: CUTTING DOWN TOP & BOTTOM RAILS
•
Reference pages 11 & 12 for rail cutting steps.
ANGLE BRACKET: BALUSTER INSTALLATION
•
Reference Baluster installation instructions on pages 13 - 15.
ANGLE BRACKET: ROUND & FLAT ACCENT TOP RAIL (ATR)
•
Reference page 15-18 for Proud Post ATR steps.
•
Reference page 18-22 for OTP ATR steps.
ANGLE BRACKET: ROUND & FLAT ATR MITER SPLICE
Step 1:
ATR Angle Splice (Proud Post)
1. Use 3/32” [2.5mm] hex wrench to tighten set screw
and lock Angle Bracket at 45
o
degree position.
As shown in Fig. 1, 2.
2. Place Angle Splice on top of ATR butting up the end
face of the splice to the face of the 3” [76mm] post.
As shown in Fig 3, 4.
3. A Rubber Mallet might need to be used to install. If using a
Rubber Mallet, use a cloth to protect the ATR from damage.
4. Secure Angle Splice with two #6-20 x 1/2” [12.5mm]
self-drilling screws.
Note:
• Angle Splice only works if brackets are angled at the
45
o
degree setting.
