21
PURE VIEW: Al
13
HOME GLASS BALUSTER INSTALLATION
Step 4:
Round ATR Splice
1. To install an ATR splice: Center the splice over the post and
with force press down over the ATR. As shown in Fig. 1,2,3.
2. A Rubber Mallet might need to be used to install. If using a
Rubber Mallet, use a cloth to protect the splice from damage.
•
ATR splices reference the inside of the post and snap down
around the ATR.
•
ATR splices allow up to 1/2” [12.5mm] of length variation
from the edge of the post. As shown in Fig. 4,5,6.
Fig. 1
Fig. 2
Fig. 3
CORNER
LINE
END
Fig. 4
Fig. 5
Fig. 6
CORNER
LINE
END
1/2”
[12.5mm]
1/2”
[12.5mm]
1/2”
[12.5mm]
1/2”
[12.5mm]
1/2”
[12.5mm]
OVER THE POST: FLAT ACCENT TOP RAIL (ATR)
Step 1:
Flat ATR Spacers
1. Measure distance between brackets and cut ATR spacer to
length. The spacer can be 1/4” [6.5mm] shorter than the
distance between brackets.
