Warranty/Tech Support
800•722•6075
Service, Installation
& Care Manual
15
GAS HOT PLATE
COUNTERTOP MANUAL GAS GRIDDLE
For conversion the following guidelines should be followed:
For conversion the following guidelines should be followed:
1. Close the manual gas valve and disconnect the
equipment from the main pipeline gas, making
sure that there is no leakage. Then remove the
pressure regulator from the gas inlet on the
equipment to make work easier.
2. Remove grills
(1)
and burners
(2)
.
3. Remove the injectors
(3)
with a 1/2” wrench.
4. In place of the removed gas injectors
(3)
, place
the new injectors that are included with the kit
shipped with the equipment. But first apply some
pipe sealant to the valve thread and then screw-
in the new injectors to the correct gas type.
5. Once the gas injectors
(3)
are changed,
reassemble your equipment
(4)
.
1. Close the manual gas valve and disconnect the
equipment from the main pipeline gas, making
sure that there is no leakage. Then remove the
pressure regulator from the gas inlet on the
equipment to make work easier.
2. Remove the manual gas griddle assembly
(1)
with the help of two or more people. For this,
extreme care must be taken, as physical injuries
or serious damage can occur.
3. Remove the screws that secure the burners
(2)
to the rear support with the aid of the double
screwdriver. Afterwards, remove the burners
from the equipment.
4. Remove the injectors
(3)
with a 1/2” wrench.
5. In place of the removed gas injectors (3), place
the new injectors that are included with the kit
shipped with the equipment. But first apply some
pipe sealant to the valve thread and then screw-
in the new injectors to the correct gas type.
6. Once the gas injectors
(3)
are changed,
reassemble your equipment
(4)
.
02. EQUIPMENT INSTALLATION
