9
MAINTENANCE INSTRUCTION
Cleaning
Your appliance has been designed to be used with tap water. If you live in an area with very hard
water, fast scale build-up will occur. Therefore it is recommended to fill the water tank with 50%
distilled water and 50% tap water to prolong the lifetime of your appliance. Do not use distilled
water only, as it is slightly acidic and may cause damage to your appliance. Do not put perfume,
vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank, as your
appliance is not designed to work with these chemicals.
Note: Please unplug the appliance from the mains supply and allow it to cool down completely.
1.
Use a dry cloth or a non-scratching cleaner to remove any deposits on the soleplate or the
appliance body.
2.
Never use sharp or rough objects to remove deposits on the soleplate.
TROUBLE SHOOTING
If the iron does not perform normally, please check the following points.
Problem
Possible Cause
Solution
The iron is plugged in but
the soleplate is cold.
The socket does not work.
Plug into another socket.
There is a connection
problem.
Check if the plug is connected to the
wall socket properly.
The temperature has been
set to the 'MIN' position.
Turn the Temperature Dial to the
desired temperature.
No steam comes out.
There may not be enough
water in the water tank.
Fill the water tank, see “HOW TO FILL
THE WATER”.
The Burst of Steam
function does not work.
There may not be enough
water in the water tank.
Fill the water tank, see “HOW TO FILL
THE WATER”.
First time usage.
Press the Burst of Steam Button few
times until the steam burst comes out.
The temp of the soleplate
is not high enough.
Incorrect temperature
setting.
Turn the Temperature Dial with
respect to the garment textile.
Water leakage from the
soleplate.
The iron's heat is not
enough to produce steam.
Set Temperature Dial to 3-dot
position.
Damage textile.
The iron is overheated.
Follow the garment guide or test on
the inside or the hem of the garment.
SPECIFICATION
Model No.
FGS2014
Product name
Steam Brush
Rated Voltage/Frequency
110-120 / 220-240V~ 50/60Hz
Power
840 – 1000W
Product Dimension (W x H x D)
315 x 85 x 70mm