22
PROGRAMMABLE OPTIONS Cont.
5. ARM & DISARM thru OEM REMOTE:
This option allows the OEM factory remote to Arm, Disarm and Remote Start the system. This feature only works on
newer CANBUS vehicle using a Data Module that supports this feature. You can select Arm and Disarm only or
Arm, Disarm and Remote Start (requires pressing lock 3 times).
Default = OFF.
6. PARKING LIGHTS ON WITH DISARM:
Keeps parking lights 30 seconds when system is disarmed to assist in locating and providing illumination near your
vehicle when approaching at night for safety.
7. DATA PORT PROTOCOL:
Default = EVO / SL Series
This option controls the Data Port Protocol for ADS / OFA Series modules or EVO / SL Series modules. The default
is set for EVO / SL Series Protocol. This option has no effect on conventional wiring of Bypass modules. Both Data
Protocols are 2-Way communication.
8. REMOTE START and TRUNK POP – Button Press Selection:
To eliminate the possibility of accidentally opening the trunk or starting the vehicle, there are (3) options for button
press selection. This option will allow you to change whether the Remote starter and Trunk release activate by a:
1. Double button - ½ second presses.
2.
Single ½ second press - Default.
3. Press and Hold 2 seconds. Aux 2 output stays active as long as remote button is pressed.
9. CHIRPS with REMOTE START ACTIVATION:
This option controls whether the system gives 3 short chirps when engaging a remote start. There are 4 choices:
1. OFF – No chirps with remote start.
2. Siren only = Default.
3. Horn only.
4. Siren and Horn.
10. DISARM with TRUNK POP:
This option controls whether the system will disarm when the Trunk release is activated from the remote control.
Default = ON.
