28
2-VEHICLE PROGRAMMING
2 VEHICLE CONTROL
Your remotes have the ability to control a second vehicle with a Crimestopper system installed.
To set up the 2-Vehicle operation you must first program your remotes to Vehicle #2. Follow the “Transmitter
Programming” steps (Pg. 26) at the second vehicle and learn YOUR remote, along with vehicle #2’s existing
remotes.
2-VEHCLE NOTES:
(1) You do not have to switch between Vehicle “1” and “2” to get pages from each vehicle. Your remote pager will
receive pages from both cars regardless of which vehicle the pager is set to. The “1” or “2” icon will always display
with each page indicate which vehicle the page originated from.
(2) When, all remote/pagers and sidekick remotes for that vehicle must be learned at the time of programming.
When you program your remote at the second vehicle, that vehicle’s original remote must also be programmed.
Your remote should be set in Vehicle “2” and the vehicle’s original remote should be set in Vehicle “1”.
VEH 1 / VEH 2
CLOCK SET
Push 2 Seconds
to change from
Vehicle 1 to 2
VEHICLE 1 = BLUE LED
VEHICLE 2 = RED LED
VEH
Push 2 Seconds
to change from
Vehicle 1 to 2
VEH 1 / VEH 2
Push VEH Button 5
Times to set Clock
VEHICLE 1 = 1 - 1
VEHICLE 2 = 2 - 1
SIDEKICK REMOTE
LCD REMOTE
Note: Use can use Vehicle 2 Mode to turn off remote if there is no system installed in a 2
nd
vehicle
VEHICLE
ICON
