manualshive.com logo in svg

Fortinet FortiWiFi 60, Installation And Configuration Manual, Page: 71 / 76

Share
Download
Fortinet FortiWiFi 60 Installation And Configuration Manual Download Page 71

Configuring the modem interface 

Configuring modem settings

FortiWiFi-60 Installation Guide

01-28008-0030-20050128

 71

3

Configure other modem settings as required.
See 

“Configuring modem settings” on page 71

.

Make sure there is correct information in one or more Dialup Accounts.

4

Configure firewall policies for connections to the modem interface.
See 

“Adding firewall policies for modem connections” on page 74

.

5

Select Dial Up.
The FortiGate unit initiates dialing into each dialup account in turn until the modem 
connects to an ISP.

Configuring modem settings

Configure modem settings so that the FortiGate unit uses the modem to connect to 
your ISP dialup accounts. You can configure the modem to connect to up to three 
dialup accounts. You can also enable and disable FortiGate modem support, 
configure what the modem dials, and select the FortiGate interface that the modem is 
redundant for.

Figure 17: Modem settings (Standalone and Redundant)

Enable Modem

 or

Enable USB Modem

Select to enable the FortiGate modem. Depending on the model, the 

modem is internal or it is a USB-connected external modem.

Modem status

The modem status shows one of: "not active", "connecting", 

"connected", "disconnecting" or "hung up” (Standalone mode only).

Dial Now/Hang Up

(Standalone mode only) Select Dial Now to manually connect to a 

dialup account. If the modem is connected, you can select Hang Up to 

manually disconnect the modem. 

Mode

Select Standalone or Redundant mode. In Standalone mode, the 

modem is an independent interface. In Redundant mode, the modem is 

a backup facility for a selected Ethernet interface. 

Auto-dial

(Standalone mode only) Select to dial the modem automatically if the 

connection is lost or the FortiGate unit is restarted. You cannot select 

Auto-dial if Dial on demand is selected. 

Redundant for

(Redundant mode only) Select the ethernet interface for which the 

modem provides backup service.

Summary of Contents for FortiWiFi 60













































































Reviews:

No comments