manualshive.com logo in svg

Fortinet FortiWAN, Handbook

Share
Download
Fortinet FortiWAN Handbook Download Page 44

How to set up your FortiWAN

Web UI and CLI Overview

-t

:

Reboot FortiWAN after seconds. Parameter second is for this.

<second>

:

The parameter in specifying the time period (in second) system waits for to reboot.

Example:

reboot -t 5

to restart the system after 5 seconds.

resetconfig: Reset system configurations to factory defaults

resetconfig

resetconfig <ip_address/netmask>

resetconfig <ip_address/netmask> <network_ip/netmask@gateway_ip>

Reset system configurations to factory default. This will delete all system settings including accounts of Web UI,
network settings and all the other system settings and service settings (See "

Appendix A: Default Values

" for the

details), please backup any configuration data (See "Configuration File" in "

Administration

") before performing this

command. This command has no changes on Reports database and bandwidth license, as opposed to command

reactivate

.

Command

resetconfig

returns IP address of LAN port to the default value 192.168.0.1/255.255.255.0, thus users

might need to change the IP address of a host to connect to Web UI via the default LAN port (See "

Connecting to the

Web UI and the CLI

"). Note that

resetconfig

resets the port mappings to factory default, please connect to the

default LAN port for access of Web UI (See "

Default port mappings

"). With specifying the parameter

ip_

address/netmask

with an appropriate IP address, command

resetconfig

returns all the configurations to

factory default but assigns LAN port with the specified IP address, so that users can connect to Web UI via the LAN
port without modifications of current network. Furthermore, a static routing subnet (See "

LAN Private Subnet

") can be

specified to the LAN port, so that you can access Web UI across subnets.

System will re-confirm, press

[y]

to proceed or

[n]

to cancel.

<ip_address/netmask>

:

The parameter in specifying the IP configuration to LAN port.

<network_ip/networkmask@gateway_ip>

:

The parameter in specifying the static routing subnet.

Example:

Type “resetconfig [IP address/Netmask]” to specify IP configuration to LAN port from resetting system to factory
default.

resetconfig 10.10.10.1/255.255.255.0

resets system to factory default, and the IP configuration of LAN

port becomes to 10.10.10.1 / 255.255.255.0 after system comes back up. IP configuration of LAN port returns to
192.168.0.1/255.255.255.0 if system is reset without specification. Note that resetting system with specification on
LAN port disables all the WAN links by default.

resetconfig 192.168.0.254/255.255.255.0 192.168.1.0/[email protected]

resets

system to factory default, and deploy the subnet to LAN port as:

l

Network: 192.168.0.0/255.255.255.0

l

Localhost (LAN port): 192.168.0.254

l

gateway: 192.168.0.1

With the specified static routing rule on LAN port, packets can be delivered to subnet 192.168.1.0/255.255.255.0 via
192.168.0.1.

44

FortiWAN Handbook

Fortinet Technologies Inc.

Summary of Contents for FortiWAN
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands