Scope
What's new
normally terminate the existing malicious connections (connection time out). Connection Limit's
Statistics lists the existing connections; aborting these connections recovers system immediately from
memory occupied. See "
".
l
Multihoming
- Supports specifying an IPv6 address in an A record and an IPv4 address in an AAAA
record to evaluate the source of a DNS request. See "
Inbound Load Balancing and Failover
".
l
Automatic default NAT rules
- Supports for all the types of IPv6 WAN link. Previously, system
generates automatically the default NAT rules for any type of IPv4 WAN link and PPPoE IPv6 WAN link
after the WAN links are applied. From this release, all the types of IPv6 WAN links are supported. See
"
".
l
Firmware update under HA deployment
- Simple one-instruction update to both master and slave
units. The master unit triggers firmware update to slave unit first, and then runs update itself. See
"
FortiWAN in HA (High Availability) Mode
".
l
New Reports pages
:
l
Dashboard - This is a chart-based summary of FortiWAN's system information and hardware
states. See "
Reports > Device Status > Dashboard
".
l
Settings - This is used to manage FortiWAN Reports. See "
".
l
Auto Routing
- A new field Input Port is added to Auto Routing's rules to evaluate outbound traffic by
the physical ports where it comes from. Correspondent VLAN ports, redundant LAN ports, redundant
DMZ ports, aggregated LAN ports and aggregated DMZ ports are the options for setting the field, if they
are allocated. See "
".
l
New and enhanced CLI commands
(See "
"):
l
New command
arp
- Use this command to manipulate (add and delete entries) or display the
IPv4 network neighbor cache.
l
Enhanced command
resetconfig
- A new parameter is added to the CLI command
resetconfig to specify a static routing subnet to the default LAN port. With specifying a proper
private LAN subnet and static routing rule, users can connect to Web UI via the default LAN port
without modifications of their current network after system reboots from resetting system to
factory default.
l
Pagination - Paginate the output of a command if it is longer than screen can display.
l
Changes on FortiWAN Logins
-
l
Fortinet default account/password (admin/null) is supported for FortiWAN's Web UI and CLI.
The old default accounts/passwords will be still accessible. See "
".
l
FortiWAN CLI accepts logins of any customized account belongs to group Administrator. A
special account maintainer is provided to reset admin password to factory default via CLI for
case that no one with the password is available to login to the WEB UI and CLI. See
"
".
l
All the accounts belong to group Administrator are acceptable to login to FortiWAN over SSH.
FortiWAN Handbook
Fortinet Technologies Inc.
14
