manualshive.com logo in svg

Fortinet FortiVoice, Administrator'S Manual, Page: 168 / 271

Share
Download
Fortinet FortiVoice Administrator'S Manual Download Page 168

Fortinet Technologies Inc.

Page 168

FortiVoice Enterprise Phone System 4.0.0 Administration Guide

To create a VoIP trunk

1.

Go to 

Trunks

 

> VoIP > SIP.

2.

Click 

New

.

3.

Configure the following:

Figure 56:

New VoIP trunk 

Port

The port for SIP sessions.

SIP Setting

The SIP profile applied to this trunk.

Status

The status of the SIP trunk.

•

Not registered

: The trunk is not registered with the VoIP service 

provider and is not in service.

•

In service

: The trunk is registered with the VoIP service provider and 

is in service.

•

Unavailable

: The trunk is not reachable.

•

Alarm detected

: There is a problem with the phone line.

•

Admin down

: The trunk is disabled.

•

Unmonitored

: The trunk is unknown.

GUI field

Description

SIP

Summary of Contents for FortiVoice
















































































































































































































































































Reviews:

No comments