FortiVoice FVC Hardware Specification Guide
Right light flashing red
Indicates a system error. From the Management software, choose
Tools > Reboot
.
If this pattern does not change, contact your authorized reseller or technical support for further
assistance.
Unit back panel
Reset button
A recessed reset button is on the back of the unit, beside the power supply connection under
the label R.
Press and hold with an unbent paperclip or similar tool. The lights on the front of the unit will
flash with different colors in sequence to indicate what happens when you release the button.
If you release while the lights are green, the system will reboot.
If you release while the lights are orange, you will clear all voicemail data from the system.
If you release the button while the lights are red, you will clear all data from the system.
When a system is powering on, it will display a variety of patterns not described here.
In the event of a power failure or loss of power to the system, extension jack E4 is able to
receive and make calls on Line 1. Note: not applicable in Australia.
