Configuring a FortiGate SSL VPN
Configuring SSL VPN settings
FortiOS v3.0 MR7 SSL VPN User Guide
01-30007-0348-20080718
37
To reserve a range of IP addresses for tunnel-mode clients
1
Go to
VPN > SSL > Config
.
2
In the Tunnel IP Range fields, type the starting and ending IP addresses (for
example,
10.254.254.80
to
10.254.254.100
).
3
Select Apply.
Enabling strong authentication through security certificates
The FortiGate unit supports strong (two-factor) authentication through X.509
security certificates (version 1 or 3). Strong authentication can be configured for
SSL VPN user groups by selecting the Server Certificate and Require Client
Certificate options on the
VPN > SSL > Config
page. However, you must first
ensure that the required certificates have been installed.
To generate certificate requests, install signed certificates, import CA root
certificates and certificate revocation lists, and back up and/or restore installed
certificates and private keys, refer to the
FortiGate Certificate Management User
Guide
.
Specifying the cipher suite for SSL negotiations
The FortiGate unit supports a range of cryptographic cipher suites to match the
capabilities of various web browsers. The web browser and the FortiGate unit
negotiate a cipher suite before any information (for example, a user name and
password) is transmitted over the SSL link.
1
Go to
VPN > SSL > Config
.
2
In Encryption Key Algorithm, select one of the following options:
•
If the web browser on the remote client is capable of matching a 128-bit or
greater cipher suite, select Default - RC4(128 bits) and higher.
•
If the web browser on the remote client is capable of matching a high level of
SSL encryption, select High - AES(128/256 bits) and 3DES. This option
enables cipher suites that use more than 128 bits to encrypt data.
•
If you are not sure which level of SSL encryption the remote client web
browser supports, select Low - RC4(64 bits), DES and higher. The web
browser must at least support a 64-bit cipher length.
3
Select Apply.
Setting the idle timeout setting
The idle timeout setting controls how long the connection can remain idle before
the system forces the remote user to log in again. To improve security, keep the
default value of 300 seconds.
1
Go to
VPN > SSL > Config
.
2
In the Idle Timeout field, type an integer value. The valid range is from 10 to
28800 seconds.
3
Select Apply.
Summary of Contents for FORTIOS V3.0 MR7
