background image

FortiGate-3810A FortiOS 3.0 MR6 Install Guide

42

01-30006-0456-20080131

Using the AMC modules

AMC modules

Log configuration using the CLI

Configure the FortiGate unit to log to the ASM-S08 using the CLI within the 
FortiAnalyzer command 

config log disk setting enable

.

For details on log configuration, see the 

FortiGate CLI Reference

.

Viewing logs

Logs and content logs stored on the ASM-S08 are available for viewing and 
analysis.

To view the FortiGate logs, go to 

Log&Report > Log Access

.

To view the content logs, go to 

Log&Report > Content Archive

. Select the log 

type and select Local from the list box.

ASM-FB4 and ADM-XB2 modules

AMC (Advanced Mezzanine Card) modules provide additional hardware 
accelerated network processing for certain eligible traffic types passing through 
their SFP (small form-factor pluggable) network interfaces. This additional 
processing resource frees FortiGate units’ main processing resources for other 
tasks, improving network performance.

FortiGate-ASM-FB4 modules can improve network throughput for:

• traffic with small packets, such as VoIP
• latency-sensitive traffic, such as streaming multimedia
• traffic with long session lifetimes, such as FTP
• IPSec VPN traffic
• active-active HA load-balanced traffic
• P2P traffic

Eligible traffic processing is off-loaded to the module. This fast path processing 
leverages the additional hardware acceleration resources provided by the AMC 
modules.

Ineligible traffic processing is processed normally. Normal processing by the 
FortiGate unit’s main processing resources (CPU, RAM, and FortiASIC content 
processor) can include some FortiASIC hardware accelerated processing, but 
does not utilize the additional hardware acceleration resources provided by the 
modules.

Changing interfaces to operate in SGMII or SerDes mode

SFP transceivers can operate in two modes: SerDes and SGMII (Serial Gigabit 
Media Independent Interface). SGMII mode is required if you have SGMII 
transceivers. In SGMII mode the interface can operate at 10, 100, or 1000 Mbps.

Upload rolled files in 
gzipped format

Select to compress the log files before uploading.

Delete files after 
uploading

Select to remove the log files once the FTP upoad has completed.

Note: 

HA logging is not available with the AMC-S08.

Summary of Contents for FortiGate FortiGate-3810A































































Reviews: