FortiGate-7000F hardware assembly and rack mounting
Fortinet Technologies Inc.
Attaching network cables to the cable mount levers
Maintain a greater than 1-inch
(2.5-cm) network cable
bend radius
Cable management
Tie cables to the mount lever
using the second round of the
cable tie.
Attach cable ties to the mount levers.
Rubber
retainer
Installing horizontal cable mount levers
Insert the other end of the mount
lever into the top hole in the bracket
on the other side of the chassis.
From the inside, insert the mount
lever through the top hole in the side
bracket and extend it a short distance
past the side bracket.
Press the mount lever down until
held in place by the rubber retainer
in each bracket.
1
1
2
2
3
3
FortiGate-7121F System Guide
23