Fortinet FortiGate 100A, Administration Manual

Page: 292 / 374

292
01-28007-0068-20041203 Fortinet Inc.
Configuring the file block list Antivirus
Configuring the file block list
To add a file name or file pattern to the file block list
1 Go to Anti-Virus > File Block .
2 Enter the file name or file pattern you want to add.
3 Select Create New.
4 Select the protocols for which you want to block the file, or select Check All.
5 Select Apply.
Quarantine
FortiGate units with a local disk can quarantine blocked and infected files. You can
view the file names and status information about the file in the quarantined file list.
You can also submit specific files and add file patterns to the AutoSubmit list so they
will automatically be uploaded to FortiNet for analysis.
This section describes:
• Quarantined files list
• Quarantined files list options
• AutoSubmit list
• AutoSubmit list options
• Configuring the AutoSubmit list
• Config
Quarantined files list
The quarantined files list displays information about each file that is quarantined
because of virus infection or file blocking. You can sort the files by any one of file
name, date, service, status, duplicate count (DC), or time to live (TTL). You can also
filter the list to view only quarantined files with a specific status or from a specific
service.
FTP Displays a check mark if file blocking is enabled to block the file pattern in
FTP traffic.
IMAP Displays a check mark if file blocking is enabled to block the file pattern in
IMAP traffic.
POP3 Displays a check mark if file blocking is enabled to block the file pattern in
POP3 traffic.
SMTP Displays a check mark if file blocking is enabled to block the file pattern in
SMTP traffic.
The Delete and Edit/View icons.