manualshive.com logo in svg

Fortinet FortiGate 100A, Administration Manual

The Fortinet FortiGate 100A Administration Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions for setting up and managing your FortiGate 100A, ensuring optimal performance and security. Seamlessly navigate complex configurations with this essential manual, designed to enhance your user experience.

Share
Download
background image

System config 

FortiGate MIBs

FortiGate-100A Administration Guide

01-28007-0068-20041203

 101

To add an SNMP community

1

Go to 

System > Config > SNMP v1/v2c

.

2

Select Create New.

3

Enter a Community Name to identify the SNMP community.

4

Configure Hosts, Queries, Traps, and SNMP Events.

5

Select OK.

FortiGate MIBs

The FortiGate SNMP agent supports FortiGate proprietary MIBs as well as standard 
RFC 1213 and RFC 2665 MIBs. RFC support includes support for the parts of RFC 
2665 (Ethernet-like MIB) and the parts of RFC 1213 (MIB II) that apply to FortiGate 
unit configuration. 

The FortiGate MIBs are listed in 

Table 6

. You can obtain these MIB files from Fortinet 

technical support. To be able to communicate with the SNMP agent, you must compile 
all of these MIBs into your SNMP manager.

Your SNMP manager might already include standard and private MIBs in a compiled 
database that is ready to use. You must add the Fortinet proprietary MIBs to this 
database. If the standard MIBs used by the Fortinet SNMP agent are already 
compiled into your SNMP manager you do not have to compile them again.

Table 6: FortiGate MIBs

MIB file name or RFC Description
fortinet.2.80.mib

The Fortinet MIB is a proprietary MIB that includes detailed FortiGate 

system configuration information. Add this MIB to your SNMP 

manager to monitor all FortiGate configuration settings. For more 

information about FortiGate MIB fields, see 

“FortiGate MIBs” on 

page 101

.

fortinet.trap.2.80.mib

The Fortinet trap MIB is a proprietary MIB that is required for your 

SNMP manager to receive traps from the FortiGate SNMP agent. For 

more information about FortiGate traps, see 

“FortiGate traps” on 

page 102

.

RFC-1213 (MIB II)

The FortiGate SNMP agent supports MIB II groups with the following 

exceptions.
No support for the EGP group from MIB II (RFC 1213, section 3.11 

and 6.10).
Protocol statistics returned for MIB II groups (IP/ICMP/TCP/UDP/etc.) 

do not accurately capture all FortiGate traffic activity. More accurate 

information can be obtained from the information reported by the 

Fortinet MIB.

RFC-2665 (Ethernet-
like MIB)

The FortiGate SNMP agent supports Ethernet-like MIB information 

with the following exception.
No support for the dot3Tests and dot3Errors groups.

Summary of Contents for FortiGate 100A























































































































































































































































































































































































Reviews:

No comments

Related manuals for FortiGate 100A

W&T 55211 Manual preview
55211
Brand: W&T Pages: 114
Atlante Informatica AFEL Series User Manual preview
AFEL Series
Brand: Atlante Informatica Pages: 4
TEMPERED Airwall-250 Series Installation Instructions preview
Airwall-250 Series
Brand: TEMPERED Pages: 2

Brands by name

Popular brands

Load more brands