Personalizing your Phone
Phone Settings
FON-450i and FON-550i Telephones Start Guide v2
13
Ring Settings
The IP phone has 9 ring tones and a no ring (
Disable Ringer
) option for incoming
call notification. There is also the option to assign each phone book record one
of the ring tones for inbound calls. The
Default Ring Tone
is used when a ring
tone is
Set as Default
or not defined for a line or phone book record.
In quieter environments, it might be useful to delay the ring signal on
incoming calls. Ringing can be delayed by up to 10 seconds. The LED light
associated to your extension will flash immediately for all incoming calls.
Default Ring Type
To change the Default Ring Type for the IP phone:
•
Press the
button, then select
3. Phone Settings
then
2. Ring Settings
.
•
Select
1. Default Ring Type
.
•
Scroll through Ring Types using the
Down
softkey. Press the
Play
softkey to
hear the selected tone.
•
Press the
Select
softkey to change to the
selected Ring Type.
•
To configure another parameter, press
the
Back
softkey to continue or press the
button to exit the configuration menu.
Line Ring Setting
To adjust the Ring Type for a line:
•
Press the
button, then select
3. Phone Settings
then
2. Ring Settings
.
•
Dial the line number plus one (2 for Line 1 or 3 for Line 2), or move the
cursor to
Line n Configuration
using the
Down
softkey and press the
Select
softkey. The value of
n
is the line button number.
•
Press the
digit, or move the cursor to
1. Ring Type
using the
Down
softkey and press the
Select
softkey.
•
Select the Ring Type using the
Down
softkey. Press the
Play
softkey to hear
the selected tone. The
Disable Ringer
selection turns the ringer off for incoming
calls on the line. The
Set as Default
uses
the Default Ring Type for incoming calls
on the line as specified in the previous
Default Ring Type
section.
FON-550i
FON-550i
Summary of Contents for FortiFone FON-450i
Page 1: ...FON 450i and FON 550i Telephones Start Guide...
Page 33: ...www fortinet com...
