Waterproof Panel
Connector
Sealing
Gland
Coupling
Ring
The unit requires 48V DC power, which is delivered by the
PoE injector
, through the
surge
protector
, over a straight-through
Ethernet cable
.
To install the weatherproof connector
1. Unscrew the
coupling ring
from the waterproof connector, remove the
sealing gland
, and
thread the RJ-45 plug through the connector components.
Cabling
2. Insert the RJ-45 plug into the PoE port on the unit and install the
weatherproof panel
connector
onto the
threaded coupling
at the port.
3.
Slide the
sealing gland
along the cable into the
panel connector
.
4. Thread the coupling ring onto the panel connector and tighten it until the sealing gland is
compressed, making a watertight seal on the cable.
9
10
