FortiAnalyzerVersion 3.0 MR7 Administration Guide
16
05-30007-0082-20080908
3.0 MR7 new features and changes
What’s new for 3.0 MR7
For the Log Receive Monitor widget, a
diagnose
command will be introduced to
provide information about total message rate, message rate per-protocol, and
message rate per-device in the CLI.
See
“System” on page 25
for information about the new widgets for FortiAnalyzer
3.0 MR7.
Custom fields for log messages
In FortiAnalyzer 3.0 MR7, you can now enable custom fields for log messages so
that when the FortiAnalyzer unit receives these types of log messages, it can
index them properly for reports or searching logs.
This feature is enabled only in the CLI using the following command syntax:
config log settings
set custom-field<1-5>
The previous logs require re-indexing for this feature to be effective on them, and
is only available in the CLI using the
diagnose
log-indexer
command. This
particular command can index per device and type, or all devices.
Reports
Reports have been enhanced and modified for FortiAnalyzer 3.0 MR7. VoIP report
charts were also included in FortiAnalyzer 3.0 MR7. These changes are also
reflected in the CLI. See the
FortiAnalyzer CLI Reference
for additional
information about the associated commands.
Report configuration enhancements
Report configuration has changed dramatically from FortiAnalyzer 3.0 MR6 to
FortiAnalyzer 3.0 MR7. These changes are also reflected in the FortiGate unit’s
web-based manager and CLI. These dramatic changes do not affect previously
configured reports in FortiAnalyzer 3.0 MR6 and earlier; however, you may want
to reconfigure certain settings to simplify the previously configured reports.
These previously configured reports are separated based on what is included; for
example, if DeviceSummary1_layout contains filters and output settings, the filters
will be put in the Data Filter tab and given a name, and the output settings will be
put in the Output tab and also given a name.
Figure 1: The previous FortiAnalyzer 3.0 MR6 reports, outlined in red, carried
forward to FortiAnalyzer 3.0 MR7 and displayed in Layout with default
report layouts
Summary of Contents for FortiAnalyzer 3.0 MR7
