Settings Overview
Page 11
FortiFone User Guide
•
Enable BLF List
— enable this to activate the BLF List.
•
BLF List number
— configure the BLF List number.
•
Enable session timer
— enables/disables the session timeout.
•
Session timeout
— configure the length of the session timeout in seconds.
•
Enable XferBack
— if a call is transferred from another user and not answered within the
given XferBack time, the call will be transferred back to the originating user.
•
Use Tel Call
— enable this to modify the request -url of an INVITE message to show tel:411
when 411 is dialed.
•
XferBack time
— configure the amount of seconds that the XferBack feature will wait before
returning a transferred call back after no answer.
Call
General
The general settings affect each of the accounts set up on the phone. These are specific
settings for how the phone operates when making or receiving a call.
•
Enable call waiting
— enable the option to allow a call to wait at the phone until answered.
•
Call waiting tone
— enable this to play a tone when a call is waiting.
•
Allow IP call
— allow direct IP to IP calling.
•
Talk DTMF Tone
— enable this to hear DTMF tones on a call if a key is pressed.
•
Dial DTMF Tone
— enable to hear DTMF tones while dialing.
•
Enable password dial
— enable if you would like to hide a portion of a number dialed that will
be used as a password. An example of use:
— Configure the Password dial prefix to be 123.
— Set the Password length to 5.
— When the number 123555556677 is dialed, the interface will display 123*****6677.
•
Password dial prefix
— the phone will monitor dialed numbers for this prefix to see if
password dial should be used.
•
Password length
— enter the number of digits to hide after the password dial prefix has been
recognized.
•
Hide DTMF
— there are four settings to select:
— Disabled — all characters entered can be seen.
— All — all characters entered will be hidden immediately, being replaced with a * character.
— Delay — characters entered will be displayed first, then replaced with * character.
— Last show — the last character entered will be displayed normally and all other characters
will be displayed as a * character.
•
Ban outgoing
— disables the ability to make calls.
•
Enable call transfer
— enable the ability to transfer calls.
•
Semi-attended transfer
— enables the ability to perform a transfer after waiting for a
connection. To perform a semi-attended transfer when on a call, press
Transfer
, then dial the
These settings do not need to be adjusted when the phone is being used with a FortiVoice.
Configuration of these settings outside of the FortiVoice is not supported.