Configuration overview
Page 13
FortiFone User Guide
VLAN
This section allows you to configure VLAN tags in accordance with IEEE 802.1 standards on the
WAN and/or PC connections.
To configure VLAN:
1.
Select
WAN Port or PC Port
. Press
OK
.
2.
Set VLAN Status to
Enable
.
3.
Enter a VID Number. This is the VLAN tag identification number.
4.
Set the Priority.
5.
Press the
Save
softkey.
Webserver type
This section allows you to configure the protocol(s) that will be used to access the web server.
By default, HTTP and HTTPS are enabled.
802.1x
The phone supports EAP-MD5 encryption in accordance with IEEE 802.1x standard.
To enable EAP-MD5 encryption:
1.
Set the 802.1x Mode to
EAP-MD5
.
2.
Enter the phone’s identity.
3.
Enter the MD5 Password for the network.
Reboot
This will reboot the phone.
Reset factory
The
Reset to Factory
section allows you to reset the phone’s configuration to factory default.
Set password
The
Set Password
section allows you to change the advanced settings password. Contact your
administrator before changing the password.
To change the password:
•
Enter the existing password.
•
Enter the new password and then confirm it.
Set AES key
The
Set AES Key
allows you to encrypt the configuration files. Contact your administrator
before proceeding.
Summary of Contents for FON-370i
Page 1: ...FortiFone User Guide for FON 370i...
Page 27: ......