7
DRIVING OFF
When the vehicle is running with the Remote-Starter, enter the vehicle and proceed with the following
steps:
STEP 1
In
sert the key and turn it to the ignition (ON/Run) position.
WARNING:
Do not turn the key to the
START
position when the
engine is running. This may damage the ignition system on some
vehicles.
STEP 2
Step on the brake pedal to disable the Remote-Starter,
and put the vehicle in gear.
REMOTE-STARTER FEATURE’S (WITH OPTION AVAILABLE)
IDLE MODE (AUTOMATIC TRANSMISSION)
Idle Mode allows the vehicle to run without the key in the ignition barrel. For example, if you stop for a
quick errand or delivery, simply allow the vehicle to run while you are gone. The engine will run until the
Remote-Starter runtime expires. Press START any time the vehicle is running with the Remote-Starter
to reset this timer. To activate Idle Mode (automatic transmission) proceed with the following steps:
STEP 1
With the key in the barrel at the ignition
(ON/RUN)
position
and the engine running, press the
START
button, until the
parking lights turn on.
STEP 2
Turn the key to the OFF position and remove the key from
the ignition barrel. The vehicle will continue to run with the
the Remote-Starter.
STEP 3
Get out of the vehicle and press the
LOCK
button to lock
the doors. The engine will run until the Remote–Starter
runtime expires.
WARNING :
Never leave children or animals in a Remote-Started vehicle unattended.
IDLE MODE (MANUAL TRANSMISSION)
Idle mode is activated in much the same way Ready Mode is activated, except for Step 1. To activate
Idle Mode (manual transmission) proceed with the following steps:
IDLE MODE ACTIVATION:
STEP 1
and
Open at least one door and ensure the transmission is in
the
NEUTRAL
position.
STEP 2
Engage the parking brake.
STEP 3
Release the brake pedal.
STEP 4
Within 20 seconds push the
START
button.
The parking lights will flash once and then remain on.
STEP 5
Remove the key from the ignition barrel.
The vehicle will continue to run with the the Remote-Starter.
STEP 6
Exit the vehicle and close all of the doors.
The vehicle will continue to run after all the doors are closed.
STEP 7
Lock the doors by pushing the
LOCK
button.
The engine will continue to run until either the transmitter (STOP) button is pressed, the Remote-
Starter runtime expires, the parking brake is disengaged, the brake is pressed, or the hood is opened.
If the Remote-Starter is shut down by transmitter it will automatically go in to Ready Mode (if all the
doors are closed).
WARNING :
Never leave children or animals in a Remote-Started vehicle unattended.