FortiGate Voice, Administration Manual

Page: 38 / 50

config pbx did FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 Administration Guide
38 01-400-112851-20100127
http://docs.fortinet.com/ • Feedback
config pbx did
Use this command to configure Direct Inward Dialing (DID). DID allows calls from external
phone systems to dial directly to extensions added to the FortiGate Voice unit.
Syntax
config pbx did
edit <pbx_did_name>
set external-line {fxo1 | fxo2 | fxo3 | fx04 |
<voip_providers>}
set cid-number <phone_number>
set extension <extension_number>
set comment <comment_string>
end
Variables Description Default
edit
<pbx_dialplan_name>
Enter the name for the dial plan. If you entering an existing
dial plan, select Tab to get to the dial plan that you want to
edit.
No
default
comments
<comment_string>
Optionally enter a description of the dial plan. No
default
config rule
Configure a new dial plan rule. No
default
edit <rule_name_str>
Enter the name of the dial plan rule to configure. No
default
callthrough {fxo1 |
fxo2 | fxo3 | fx04 |
<voip_providers>}
Select one or more destinations that the dial plan rule
sends outgoing calls to.
fxo1
,
fxo2
,
fxo3
, and
fx04
are
the 4 PSTN interfaces.
<voip_providers>
are the VoIP
providers added to the FortiGate Voice. A dial plan rule
can send calls to one or more destinations.
No
default
dest-pattern
<pattern_str>
Enter the dial pattern used to select this dial plan. Use the
following characters to create the dial plan:
A pattern always begins with an underscore _ and the
pattern can include the following characters:
•
X matches numbers 0-9
• Z matches numbers 1-9
• N matches numbers 2-9
• [15-7] matches single digits 1, 5, 6, and 7
• . one or more digits
• ! zero or more digits
So the pattern _9X. means any number of digits 0 to 9
where the first digit is a 9. _6XXX means any 4-digit
number that begins with a 6.
No
default
strip <digit_int>
Enter the number of the digit to remove from the incoming
number. 0 means do not strip any digits. 4 means strip the
4th digit. Usually you would strip a leading digit added to
route the call to an external destination.
0