FortiGate Voice Administration Manual Download Page 15 | Manualshive

Page: 15 / 50

background image

Example FortiGate Voice branch office configuration

Connecting the FortiGate Voice-80C unit

FortiGate Voice Version 4.0 Administration Guide
01-400-112851-20100127

15

http://docs.fortinet.com/

•

4

Configuring the FortiGate Voice PSTN and PBX settings.

5

Configure the FortiFones on the internal network.

6

Configuring the FortiGate Voice unit to SIP phone users behind a remote NAT device.

Connecting the FortiGate Voice-80C unit

The following procedure describes how to connect the FortiGate Voice-80C unit to the
Internet, the branch office internal network, and the PSTN.

To connect the FortiGate Voice-80C unit

1

Use an Ethernet cable to connect the FortiGate Voice-80C wan1 interface to the device
that connects the branch office to the Internet.
The device could be a cable or DSL modem or other device depending on how the
Branch Office connects to the Internet.

2

Use Ethernet cables to connect the PCs and FortiFones on the internal network to the
FortiGate Voice-80C internal interface switch connectors.
You can connect up to 8 PCs and FortiFones directly to the FortiGate Voice-80C
Internal interface switch connectors. To connect more devices, add Ethernet switches
to your network as required.

3

Use an RJ-45 telephone cable to connect the FortiGate Voice-80C fxo1 port to the
branch office PSTN phone line supplied by your local telephone service provider.

Configuring basic FortiGate Voice-80C network and UTM settings

The following procedures describe how to configure a FortiGate Voice-80C to provide
basic Internet connectivity, network services, and UTM services for the branch office
internal network. Network services include configuring the FortiGate Voice-80C to be the
DHCP server and DNS server for the internal network.
As part of the FortiGate Voice-80C network interface configuration you must enable

SIP

Traffic

on the internal and wan1 interfaces so that the FortiGate Voice-80C unit accepts

SIP sessions received by these interfaces. No other special network configuration, firewall
policies, or routing is required for the FortiGate Voice-80C to accept SIP sessions from
configured extensions.

To configure basic network settings

1

Connect to the FortiGate Voice-80C web-based manager.

2

Go to

System > Network > Interface

.

3

Edit the

internal

interface and configure the following settings:

Configure other network interface settings as required and select OK.

4

Edit the

wan1

interface and configure the following settings:

Addressing Mode

Manual

IP/Netmask

172.20.120.10/255.255.255.0

SIP Traffic

Select Enable

«
...
13
14
15
16
17
...
»

Summary of Contents for Voice



















































Reviews:

No comments

Related manuals for Voice

Brand: NEFFOS Pages: 32

Brand: Pantech Pages: 2

Brand: N-Com Pages: 32

Brand: Yealink Pages: 2

Redmi Note 10 JE

Brand: Xiaomi Pages: 10

Skype V500DS-S1

Brand: Aztech Pages: 2

Brand: Vonino Pages: 87

SRM9030plus Garioch

Brand: Scot-tel Garioch Pages: 2

Brand: i-mobile Pages: 58

Brand: HTC Pages: 16

Brand: Cricket Pages: 12

BLACKBERRY P'9982

Brand: PORSCHE DESIGN Pages: 226

Brand: myPhone Pages: 2

Brand: Sangoma Pages: 9

Brand: Audiovox Pages: 44

Brand: Micromax Pages: 18

Brand: ATCOM Pages: 60

HANDLEPLUS 326I GSM

Brand: Doro Pages: 280

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands