Secure the connection plate with the hardware
provided
INSTRUCTIONS
Locate the Center Bio Clean ARS, align, and place
into position
Tighten the hardware using an allen key
Install the pressure mount system
If no temper-proof screws are needed, proceed to tighten the
hardware using an allen key. Take care not to over tighten the screws.
Finally, repeat the pressure mount installation methods from the
previous step, and if your unit came with multiple panels, simply
repeat these steps and attach them all, as needed.
1.
3.
4.
Step 2 - Installing the Center Bio Clean ARS
Secure the connection plate with the hardware provided. Depending
on the county you are located in, you may need to install temper-
proof screws. Please check your project drawings to verify the
hardware needed.
Begin Step Two by locating the Center bio Clean ARS and aligning
it to the previously installed Left Bio Clean ARS so that the center
sections connect, as shown.
2.
8