4
1.
Plug network (Ethernet) cable into the
bottom of the terminal (labeled ETH).
NOTE: Do not use a phone cord.
2.
Plug in the terminal’s power cable. A
blank screen will appear momemtarily.
3.
Wait for the CommServer, Forte and
CAM screen.
4.
Press F3 for Forte.
5.
The screen will cycle through the
following messages:
Reading Batch File for Merchant I
Communication Status - Connected
6.
Wait for the Credit/Debit/Check screen.
a.
Reading Batch File for Merchant I
b.
Communication Status
c.
Initializing Pin Pad
d.
Initializing - Please wait
7.
The terminal is now ready to use.
8.
We recommend running a test
transaction to ensure functionality. A
good option is to charge $0.01 and then
to void the transaction.
Terminal Setup