30
Lamborghini burner error codes
and ways they are indicated
If the burner is in the blocked mode, it will be indicated by non-flashing red colour
of the LED at the back-lit button on top of the burner. By pressing transparent
button on top of the burner for a short time only, the entire burner start, oper-
ation and self-diagnosis control process is skipped. By pressing this transparent
button and holding it depressed for at least 3 seconds, the burner start and diag-
nosis control process is commenced (the red light will flash fast). The Table below
explains some possible burner blockage cases, depending on error occurrence in
the burner start and self-diagnostics procedure. This information is available by
counting the number of flashes of the red LED (always the red one). The diagno
-
sis function can be discontinued by pressing the button on burner enclosure and
holding it depressed for at least 3 seconds.
MACHINE STATUS INDICATOR
Condition
LED colour
Standby mode, other intermediary
modes
No light
Fuel heating in the burner starting
phase, waiting time max. 5 seconds
Yellow
Fuel / air mixture ignition stage
Yellow, flashing
Proper operation
Green
Improper operation, the infrared sen-
sor cannot see any flame
Green, flashing
Voltage drop
Yellow / red, flashing alternately
Burner blocked
Red
Error
Red, flashing
Scattered light on the sensor prior to
mixture ignition
Green / red, flashing alternately
Self-diagnostics
Red, quick flashing
