40
Use and maintenance
ATOMIZER ON VISION MULTIFUNCTION MACHINE
The ATOMIZER is therefore considered to be a machine and as
such is «CE» marked in compliance with the European Union
standards set out in Directives 2006/42/EC and 2004/108/EC,
as reported in the declaration of conformity of which each ma
-
chine is accompanied and reported on page 5 in the facsimile.
The below regulations have also been applied for the manu
-
facture of the machine:
- UNI EN ISO 12100:2010
- Safety of machinery - General
principles of design - Risk assessment and risk reduction
- UNI EN ISO 13857:2008
- Safety of machinery - Safety rules
to prevent the reaching of dangerous areas with the upper
and lower limbs.
- UNI EN 349:200
8 - Safety of machinery - Minimum space
to avoid crushing of body parts.
- UNI EN ISO 4254-6:2010
- Agricultural machinery - Safety
- Part 6: Sprayers and liquid fertilizer distributors.
The machine (and machine means: the atomizer installed
on the Vision multifunction machine) is an agricultural
sprayer machine designed exclusively for treating crops
by spraying plant protection products (anti-cryptograms or
anti-parasites). Different uses are not allowed and we are
not liable for any damage caused by the use of chemicals
that are aggressive, dense or prone to sticking.
As an alternative to the atomizer group with radial bars
(Fig. 3), the machine can be equipped with a vertical bar
atomizer (20 Fig. 3)
1.4.1 PROHIBITED USES
It is strictly forbidden to use the atomizer with the below pro
-
ducts:
- Paints of all kinds and types
- Solvents or thinners for paints of any kind or type
- Fuels or lubricants of any kind or type
- LPG or gas of any kind or type
- Flammable liquids of any kind or type
- Both animal and human food liquids
- Liquids containing consistent granules or solids
- Mixtures of more than one incompatible chemical product.
THE MACHINE IS CERTIFIED TO BE DRIVEN ON PUBLIC
ROADS.
1.4.2 CONTROL AND MONITORING SEAT
The machine was designed to be operated by only an Operator
seated in the driver’s seat with the safety belt fastened. The
seat of the Vision multifunction machine (18 Fig. 3) has a safety
system with a sensor that detects the presence of the Operator
in the driver’s seat.
IF THE OPERATOR IS NOT SITTED ON THE APPROPRIATE
SEAT, THE MACHINE CANNOT BE SWITCHED ON AND
CANNOT CARRY OUT THE FUNCTIONS FOR WHICH IT IS
INTENDED.
Dimensions in mm
Fig. 2 - Overall dimensioni
2600
1200
(on
the
pressure
gauge)
1900
(on
the
rollbar)
685
