Thermostat Configuration
Page: 5
To configure the thermostat using its controls you will need to do the following:
(1) In standby mode indicated by the Thermostat displaying “ ”, long press “ ” to enter the configuration menu.
(2) The first item will display “ ”, press “ ” to enter the configuration for the first item.
(3) You can adjust the setting by pressing “ ” or “ ”.
(4) “ ” will flash, and then press “ ” will save current settings, and exit to the configuration menu.
(6) Finally once all menus have been configured, long press “ ” to save and exit the configuration menu.
(5) Use the “ ” or “ ” to select the configuration menu, and then press “ ” to enter the next configuration, and
follow the steps
3
&
4
.
Restore factory settings:
After entering the configuration menu, press and hold both the “ ” and “ ” buttons, to restore the thermostat to
factory settings, the thermostat will display “ ” and flash 3 times.
This will remove any custom configuration setting(s) and programming setting(s)
Step
No.
Displayed
(Factory Default)
Press “ ” or “ ” to select
Descriptions
1
2
3
4
5
6
7
8
9
-4°C to +4°C
+20°C to +35°C
+5°C to +20°C
0.5°C to 3°C
4 / 6
Temperature calibration
Select maximum setting temperature range
Select minimum setting temperature range
Start heating conditions:
When setting temperature -Room temperature ≥ 0.5°C
(0.5~3°C option), start heating.
Room temperature ≥ Setting temperature, stop heating.
Number of programming periods per day;
2 ON & 2 OFFs / 3 ON & 3 OFFs
Intelligent function (Optimal start)
Frost Protection function
Thermostat Relay Output
Thermostat LED Display option
ON: LEDs displays on Thermostat VIA app.
OFF: LEDs don’t display on Thermostat VIA app.
