17
Care and Maintenance of the Automatic Feeder
6.2 Regular Check
Clean the mixer daily.
Remove the suction hoses from the teat and suspend them.
Turn the program switch to
3
.
Fill the mixer with water until the pressure switch interrupts water con-
veyance.
Add some detergent also used in dairy farming.
Turn the program switch to
2
.
Shortly afterwards, turn the program switch to
0
.
Wipe out and empty the mixer resp. drain the cleaning water via the suc-
tion hoses.
Turn the program switch to
3.
Rinse with clean water.
Remount the suction hoses on the teat.
Turn the program switch to
4
.
Check the concentration of the milk powder after each new milk powder
delivery.
Check the temperature of the milk.
In case of direct water supply, check whether the filter of the pressure
reducer and the solenoid valve are clean. Clean them, if necessary.
6.3 Shutdown
Turn the heating thermostat entirely counter--clockwise. Switch the auto-
matic feeder off by turning the main switch to position
0/OFF
and pull
the mains plug.
Summary of Contents for TAP0-EZ1-27
Page 2: ......
Page 21: ...21 Index water supply 7 9 ...
