WARNING!
• Do not remove the filter
while the appliance
operates.
• Do not clean the pump if the
water in the appliance is hot.
Wait until the water cools
down
Proceed as follows to clean the pump:
1. Open the pump cover.
1
2
2. Place a suitable bowl below the drain
pump access to collect the water that
flows out.
3. Squeeze the two levers and pull the
drainage duct forward to open it.
2
1
1
4. Let the water flow out.
5. When the bowl is full of water, close
the drainage duct back and empty the
container.
6. Repeat the steps 4 and 5 until the
water stops flowing out.
1
2
7. Close the drainage duct and turn the
filter anti-clockwise to remove it.
1
2
8. If it is necessary, remove fluff and
objects from the filter recess.
9. Make sure that the impeller of the
pump can rotate. If it does not rotate,
contact the Authorised Service Centre.
25
