In the display all washing phase indicators
become steady and the time area shows
.
The indicator of the Start/Pause button
goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn the
programme dial to set a new
cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
Draining water out after end of
cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
• The display shows the indicator , the
option indicator
or and the door
locked indicator
. The indicator of
the running phase
flashes.
• The drum still turns at regular intervals
to prevent the creases in the laundry.
• The door stays locked.
• You must drain the water to open the
door:
1. If necessary, touch the Spin button to
decrease the spin speed proposed by
the appliance.
2. Touch the Start/Pause button:
• If you have set
, the appliance
drains the water and spins.
• If you have set , the appliance
only drains the water.
The option indicator
or goes out,
while the indicator flashes and then
goes off.
3. When the programme is completed
and the door locked indicator
goes
off, you can open the door.
4. Press the On/Off button a few seconds
to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease the
energy consumption when:
• You do not use the appliance for 5
minutes before you touch the Start/
Pause button.
Press the button On/Off to activate the
appliance again.
• After 5 minutes from the end of the
washing programme
Press the On/Off button to activate the
appliance again.
The display shows the end of the last
set programme.
Turn the programme dial to set a new
cycle.
If you set a programme or an
option that ends with water in
the drum, the Stand-by function
doesn't deactivate the
appliance to remind you to
drain the water.
21
