Forno FFSGS6187-30, Installation Manual

Page: 24 / 34

Use of the Cook plate (Griddle)
Your
FORNO
range may have come with a standard reversible grill/griddle. For best use and results
please read below.
Pre-heat gently
- Because the FORNO grill/griddle is so large it can take time for it to heat evenly. Once
it's up to temp it will stay there for a long time! We recommend starting with your range set to low heat and
gradually increasing the heat until you get to your target temp. It's easier to make a grill hotter once it's
already warmed up, by pre-heating slowly you can control the heat more easily. To be efficient with your
time you can start the pre-heating process while you're getting your ingredients together. It typically takes
10-15 minutes to completely pre-heat the FORNO grill/griddle this when pre-heating in this manner. Then
enjoy your cooking experience on the FORNO grill/griddle
Start low and don't overheat!
- You might get the urge to turn your burners up to full blast the first time
you use the FORNO grill/griddle, but don't! Burners only need to be set to 1/3 to 1/2 power to heat the grill/
griddle to over 500 degrees. Most chefs agree that the maximum cooking temperature you'll ever need is
500-550 degrees for searing a steak.
CAUTION
The surface of griddle and grills are hot after use. Please allow sufficient time for
the griddle to cool before cleaning.
Cooktop Cleaning Tips
• To prevent the cooktop from discoloring or staining, clean cooktop after each use, and wipe upacidic or
sugary spills as soon as the cooktop has cooled.
• The sealed burners of your range are not secured to the cooktop and are designed to beremoved. Boil
overs or spills will not seep underneath the cooktop. The burners should be cleaned
after each use.
Oven Light
The oven light is controlled by a push switch on the control panel.
The light can be used while cooking or cleaning the oven.
WARNING
Check that power is disconnected from the electrical box before replacing
the light bulb. Allow the oven to cool completely, then disassemble the light cover and remove the
light bulb by unscrewing it from the socket. Replace with a 40-watt halogen bulb.
Oven Roasting
24
LED Light Switch
Use the LED light switch to turn on the LED lights when the room becomes dark.
Use the screws on
the rotisserie rod to
adjust the distance
between the forks.
Insert the smooth side of the rotisserie
rod into the rotisserie motor on the
right side.
Hang the side with sink limit of the
rotisserie rod to the hook on the
left side.