Forno FFFD1907-33S, Instruction Manual

Page: 13 / 32

1
Flipper clapboard
1. Ensure that the flipper clapboard (depending on model) is in proper position; otherwise the
door cannot be closed properly.
2. It is normal that the clapboard becomes hot as it is equipped with an integrated heating
element for dewing protection
Correct Incorrect
Operation
WARNING!
To disconnect the appliance from the mains, you must unplug the appliance or
use a cut-off device
Before initial operation
WARNING!
While unpacking, the packaging materials (polythene bags, polystyrene pieces,
etc.) should be kept away from children and pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE!
Leave the appliance in an upright position for at least 4 – 6 hours before you connect it
to the mains to ensure, that the oil has flowed back into the compressor.
NOTICE!
If you use the appliance for the first time or the appliance has been disconnected
from the mains for a longer period of time, allow the appliance to cool down for 3 until 4 hours
on medium temperature setting (s. chapter SETTING OF THE TEMPERATURE ) before you place
any fresh or frozen food in the appliance. If you place food in the appliance before it has
reached its normal operating temperature, this food can thaw and / or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
CLEANING AND MAINTENANCE ).
3. Do not start the appliance immediately after installation. Wait at least 4 – 6 hours to ensure
proper operation.
4. The settings of the temperature of the fridge can be adjusted manually. To do this, turn the
thermostat for the temperature to the desired setting. (see chapter
SETTING OF THE
TEMPERATURE ).
5. If operation was interrupted, wait
at least 5 minutes
before restart.
6. The appliance needs some time to balance temperatures when you have changed the settings
before or when you have stored additional food in the appliance. The duration of this period of
time depends on the range of the change, the ambient temperature, the amount of food and the
frequency of door-openings. When you set the temperature of both the fridge and freezer,
these aspects should be taken into account.
7. Operate the appliance according to the instructions described in the following chapters.