Forno FFFD1907-33S, Instruction Manual

Page: 10 / 32

9
damp cloth using lukewarm water and a mild detergent ( see also chapter
CLEANING AND
MAINTENANCE
). Never remove any components of the back of the appliance!
4. Install the appliance in a suitable position with an adequate distance from sources of heat
and cold.
5. If installation near a heat source is unavoidable, use a suitable insulation plate or keep the
following
minimum distances
to the heat source:
To electric cookers At least 30mm
To radiators or ovens At least 300mm
To another refrigerators At least 20mm
6. Check that the appliance and the power cord are not damaged.
7. Install the appliance in a dry and well-ventilated place.
8. Protect the appliance from direct sunlight.
9. The door(s) must open completely and without hindrance.
10. Install the appliance on a level, dry and solid floor. Check the correct installation with a
bubble level.
11. Connect the appliance to the mains properly.
12. The rating plate is inside the appliance or at the back
Accessories
Door handle 2pcs
Bolt 4pcs
Allen wrench 1pc
Door handle installation
1.
Place the bolt into the hole on the fridge door
，
Tighten the bolt with
screw driver by clockwise
；
2.
Align the two holes on the handle with the bolts on the fridge door,
push the handle to the door
until it fits the fridge door closely;
3. Use Allen wrench to tighten the screws on two ends of handle.