- 7 -
4.ASSEMBLY AND INSTALLATION
4.1.
Frame mounting
Remove the machine from its packing and place it in the required location according to the following instruc-
tions.
Allow a free space around the machine of al least 1000 mm, to be able to for the operator and to the mainte-
nance staff to access the machine without any problems. This area should remain free to be able to access all
parts of machine if necessary.
a. Packing
Remove the machine from the transport hole
A
and slide it into hole
B
, install the washer provided. Lock the
rotation of the machine with the spring loaded pin. Finally, install the reinforcement cross member with the
screws.
b. Floor fixing
Fix the machine to the floor with screws through the prearranged holes.
c. Bleeding valve
Remove the plastic cap from the oil expansion vessel and screw on the oil bleeding valve provided in place of
the cap.
