Manual - Formech FLB1000
4
Introduction
The FLB1000 is a manually operated line bending machine that is capable of producing high quality bends
in plastic sheet from standard materials up to 1000mm wide.
Operating from a normal domestic electrical supply the FLB1000 Line Bender is easy to use with simple
controls.
The machine is ideal for training applications where students are able to produce items in a range of
materials and thicknesses.
It is robust enough to find uses in industry, particularly for display purposes e.g. menu holders, price holders
and machine guards.
It is small enough to be stored away when not in use or to be transported for demonstration purposes etc.
Installation of Quartz Heating Element
The Quartz Heating lamp is packaged securely inside the appliance during transit.
To install the heating lamp follow the procedure below:
1. Remove the 8 screws from the base of the unit and the 2 countersunk screws from each side to remove
the base of the unit and gain access to the internal of the unit.
2. Remove the packaged lamp from inside the unit.
3. Inspect the lamp and report any breakages.
4. The lamp fits between the 2 lamp holders at each end of the heater strip. The lamp holders are spring
loaded.
5. Place a lamp end in to a lamp holder and carefully push the other end of the lamp into the other end. Do
not apply excessive force. Ensure there are no other obstructions.
6. Check the lamp is securely in place.
7. Ensure all packaging is removed from inside the unit.
8. Replace the base retaining screws.
9. The product is ready for normal use.
Machine storage
The Formech FLB1000 must be stored in a dry environment.