11
Exterior cleaning
•
Turn shredder off and unplug from wall outlet.
•
Wipe the exterior surfaces with a soft cloth. If the surfaces are very dirty, use a neutral detergent, then wipe
again with a soft cloth.
CAUTION:
•
Never put water directly on the surface of the shredder.
•
Never clean the case with benzene or thinner, since it will cause discoloration.
Lubricating Shredder Mechanisms
•
Drive Chains: The drive chains should be checked
during PMs, and greased as needed.
1. Switch off the shredder and unplug from wall outlet.
2. Remove both top side covers.
3. Grease the cutting system conveyor belt drive chain
(A) and the motor cutting system drive chain (B).
4. Replace side covers and plug in shredder.
•
Synchronizing Wheels:
1. Switch off the shredder and unplug from wall outlet.
2. Remove left top side cover.
3. Remove the gear cover.
4. Grease the synchronizing toothed wheel (C).
5. Replace covers and plug in shredder.
A
B
Right Side
C
Left Side
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920