background image

5

1.

2.

3.

1.

2.

3.

Invoice

Flyer

Brochure

CONTROL PANEL - Home Screen Interface

No

.

NAME 

FUNCTION

1

Form Size Display

Shows the size of the forms loaded in the pressure sealer

2

Resettable Counter

Displays the number of forms processed, can be reset between each job

3

Counter Reset Icon 

Resets the counter to “0”

4

Fold Selection Icon

Press to advance to fold selection screen

5

Custom Fold Access

Press to select or edit previously saved custom folds 

6

Operator Settings Icon Press to enter to the operator settings screen

7

Start / Stop Icon

Press to start the pressure sealer. Press to stop the pressure sealer.

5

7

6

4

1

2

3

Any icon with a blue frame around it (i.e. #4 above) can be adjusted by pressing the icon. 
Icons without a blue frame (i.e. #1 above) provide status, and cannot be pressed. 

In any other screen, use the              icon after choosing a setting or entering information.

To return to the home screen from any other screen, press the             home icon.

Install Form Knock Down Strap

1.

To improve the stacking of folded forms attach the 
magnetic form knock down strap to the support bar 
below the upper fold table (Fig. 3).  The strap can be 
adjusted up or down or left to right for best results.

Fig. 3

Summary of Contents for FD 1606 AutoSeal


























Reviews: