Formax CJ-10, Operation Manual, Page: 6 / 9

CONVEYOR ASSEMBLY
1. Install the infeed and exit roller assemblies. First install the infeed roller guides. Turn the conveyor on its side, then
using the Allen wrench supplied, remove the four Button Head Allen screws from the infeed end of the conveyor (Fig
1a).
2. Turn the conveyor upright and place the infeed rollers in position (Fig. 1b).
3.
Use the four Button Head screws supplied with unit, to install the outfeed roller assembly (Fig. 1c).
2
Fig 1a
1
2
3 4
1. Exit roller assembly
2. Infeed roller assembly
3. Back infeed guide
4. Front infeed guide
Mount the side guides using
these screws.
Fig 1b Set the infeed roller assembly
onto the infeed guides.
Mount the outfeed roller
assembly.
Fig 1c
CJ-10 Leg 282-30 Leg