background image

Error Screens

Paper Out / Paper Mis-Feed / Paper Jam

1. The  feeder is empty. Load paper paper into the 
feeder and press the “           “  icon to resume opera-
tion. 

2. A mis-feed has occurred. Reset the stack of paper 
in the in-feed and press the “           “  icon to resume 
operation. 

3. A Paper jam has occurred in one of the areas 
indicated. Turn the folder to the off position and un-
plug. Check the area indicated for paper and remove. 
Replace the fold plates and plug the folder  in and the 
power on.

The top cover is open. Close the top cover and press 

the “            “  icon to resume operation.

FD 342 Touch Screen -Error Screens

Error screen will appear with arrow pointing to empty 

infeed tray.  Press return arrow to go back to the home 

screen.

* Paper Out screen will come on if start is pressed and 

the is no paper in the feed tray.

Error screen will apear with arrow pointing to open 

cover with indicator to close cover.  Press return arrow 

to go back to the main screen.

Paper Jam 

Error screen appears with arrows pointing to possible areas 

to check.  Press the return arrow to go back to home screen 

at any time.  If the jam is not cleared the error screen will 

appear again after pressing start or 1x.

Paper misfeed

Error screen will appear with arrow pointing to infeed.  

Press return arrow to go back to the home screen.

Cover Open

Paper Out

FD 342 Touch Screen -Error Screens

Error screen will appear with arrow pointing to empty 

infeed tray.  Press return arrow to go back to the home 

screen.

* Paper Out screen will come on if start is pressed and 

the is no paper in the feed tray.

Error screen will apear with arrow pointing to open 

cover with indicator to close cover.  Press return arrow 

to go back to the main screen.

Paper Jam 

Error screen appears with arrows pointing to possible areas 

to check.  Press the return arrow to go back to home screen 

at any time.  If the jam is not cleared the error screen will 

appear again after pressing start or 1x.

Paper misfeed

Error screen will appear with arrow pointing to infeed.  

Press return arrow to go back to the home screen.

Cover Open

Paper Out

Cover Open

FD 342 Touch Screen -Error Screens

Error screen will appear with arrow pointing to empty 

infeed tray.  Press return arrow to go back to the home 

screen.

* Paper Out screen will come on if start is pressed and 

the is no paper in the feed tray.

Error screen will apear with arrow pointing to open 

cover with indicator to close cover.  Press return arrow 

to go back to the main screen.

Paper Jam 

Error screen appears with arrows pointing to possible areas 

to check.  Press the return arrow to go back to home screen 

at any time.  If the jam is not cleared the error screen will 

appear again after pressing start or 1x.

Paper misfeed

Error screen will appear with arrow pointing to infeed.  

Press return arrow to go back to the home screen.

Cover Open

Paper Out

6

Summary of Contents for AutoSeal FD 1506













Reviews: