Formax Atlas C350, Operator'S Manual

Page: 71 / 95

71
2
Change Crease Blades
When replacing creasing blades choose the currently installed creasing blades on this screen.
NOTE:
For blade set replacement instructions, see the “Replacing Dyna mic Crease Blade
Sets” or “Replacing Quick Release Blade Sets” section within this manual.
Element Description
A Creaser 1
Optional
Quick Release Blade Static Creaser
NOTE:
The perforation blade option can be chosen.
B Creaser 2 DynaCrease Blade Set
NOTE:
Not compatible with perforation.
C Blade buttons Choose the type of blade currently installed in each creaser: [Stand-
ard], [Narrow], [Extra Narrow] or [Perforation]. Based on this setting
machine parameters will be adjusted to suit the blade.
D Direction
buttons
Set the creasing direction (up or down) of each creaser.
NOTE:
The perforation blade direction cannot be chosen.
E Home position
button
Use this button to move the creasing mechanism to its home position.
This helps when inserting / removing the blade set.
A
B
C D E