FormFit
Hood Protector
#2 Phillips Screwdriver
with LONG SHANK
HD 10M18
Difficulty stated above reflects the minimum level of expertise required to install the accessory.
( A ) Customer ( B ) Dealer Technician ( C ) Master Technician
(B)
Accessory Installation
Notes to the Installer:
Read the entire installation manual prior to beginning the installation of the
accessory.
Make sure the vehicle is at room temperature or warmer: 15° to 43°C (60° to
110°F) before starting installation and that it remains at room temperature for
1 hour afterward to develop maximum adhesion of the 3M tape to the
vehicle's surface.
Masking tape
Vehicle Model
Hyundai Elantra GT
Accessory
Hood Protector
Basic Required Hand Tools
Instructional Symbols / Definitions
Clean Cloth
To prevent vehicle damage, never place tools on top of painted surfaces,
seats, dash pad, console or floor carpet / mat.
Always wear appropriate safety gear to include gloves and eye protection
when required.
Make sure the vehicle is clean and completely dry before installation.
Model Year
2018 - up
Difficulty
Note:
Part No.
Denotes safety equipment required to be used
such as a mask, safety glasses, gloves, and
hearing protection.
Safety Glasses
Hearing Protection
Mask
Gloves
Denotes instructional steps
necessary to complete the process.
Denotes quality processes to be
checked prior to moving to the next
step.
Denotes cautions to be taken to avoid physical
injury or electronic component damage.
Denotes warnings that may lead to serious
physical injury or vehicle damage.
Denotes specific tools that are
necessary to complete the step.
Denotes cautions to be taken to avoid vehicle
and component damage.
HD 10M18
Rev0.May 11, 2018
page 1 of 9
