DRT-301M User Manual
Shanghai Fengyilong Electronic Co,. Ltd.
www.china-meters.com
Email:[email protected]
021-60975591/ 60975592
1.1 Safety instructions
Information for Your Own Safety
This manual does not contain all of the safety measures operating the equipment (module, device) for
different conditions and requirements. However, it does contain information which you must know for
your own safety and to avoid damages. These information are highlighted by a warning triangle
indicating the degree of potential danger.
Warning
This means that failure to observe the instruction can result in death, serious injury or
considerable material damage.
Caution
This means hazard of electric shock and failure to take the necessary safety
precautions will result in death, serious injury or considerable material damage.
Qualified personnel
Operation of the equipment (module, device) described in this manual may only be performed by
qualified personnel. Qualified personnel in this manual means person who are authorized to
commission, start up, ground and label devices, systems and circuits according to safety and
Regulatory standards.
Use for the intended purpose
The equipment (device, module) may only be used for the application specified in the catalogue and
the user manual, and only be connected with devices and components recommended and approved
by Forlong.
Proper handling
The prerequisites for perfect, reliable operation of the product are proper transport, proper storage,
installation and proper operation and maintenance. When operating electrical equipment, parts of this
equipment automatically carry dangerous voltages. Improper handling can therefore result in serious
injuries or material damage.
Use only isulating tools.
Do not connect while circuit is live (hot).
Place the meter only in dry surroundings.
Do not mount the meter in an explosive area or expose the meter to dust, mildew and insects.
Make sure the wires are suitable for the maximum current of this meter.
Make sure the AC wires are connected correctly before activating the current/voltage to the
meter.
Do not touch the meter connecting clamps directly with metal, blank wire and your bare hands as
you may get electrical shock.
Make sure the protection cover is placed after installation.
Installation, maintenance and reparation should only be done by qualified personnel.
Never break the seals and open the front cover as this might influence the function of the meter,
and will cause no warranty.
Do not drop, or allow strong physical impact on the meter as the high precisely components inside
may be damaged.
