manualshive.com logo in svg

forlong DRT-301M, User Manual

Share
Download
forlong DRT-301M User Manual Download Page 11

                                                              

DRT-301M User Manual 

                                                                                                                                                                                                                                         
 
Shanghai Fengyilong Electronic Co,. Ltd.                         

www.china-meters.com

                            Email:[email protected]

 

                                                                                                                                                                            021-60975591/ 60975592 
 
 

 
 
 
 
 
 
 
 
 
 

 

Problem 

Check 

Solution 

 
 
 
 
No light for the 
communication 
indicator(COM.LED) 

Is there a power 
supply inside the 
meter? 
 
 
Does any 
equipment outside 
communicate with 
the meter 
 
Maybe there is a 
fault in the inside 
circuit. 

Check that the power supply   
 
Only when the communication 
between the meter’s infrared port   
Or the RS485 port and the 
equipment outside, The LED will 
blink   
 
 
 
Please contact your technical 
supporter to replace this meter. 

Summary of Contents for DRT-301M














Reviews:

No comments

Brands by name

Popular brands

Load more brands