forlong DRT-301M User Manual Download Page 1

                                                              

DRT-301M User Manual 

                                                                                                                                                                                                                                         
 
Shanghai Fengyilong Electronic Co,. Ltd.                         

www.china-meters.com

                            Email:[email protected]

 

                                                                                                                                                                            021-60975591/ 60975592 
 
 

 

 

DRT-301M   

 
 
Three phase DIN rail energy meter with multi-tariff

 

 

Seven modules 
 
 

 
 
 

 

 
 

 

 
       

1.1          Safety instructions 

1.2          Foreword 

1.3          Performance criteria 

1.4          Meter specification   

1.5          RS485 communication specification 

1.6          Far Infrared communication specification

 

1.7          Basic errors 

1.8          Description 

1.9          Dimensions 

1.10        Installation

 

1.11        Operating 

1.12        Troubleshooting 

1.13        Technical support 

 
 
 
 
 

User manual

Summary of Contents for DRT-301M














Reviews: